10F Insertion kit with built-in hemostatic valve (5pcs / package)

Loaders with a built-in haemostatic valve are specially designed for cardiological and radiological applications, ie for selective catheters, for changing the catheter left in the heart during examination, or introducing bioptomes, etc. The haemostatic valve minimizes back bleeding and aspiration during insertion or replacement of catheters. Arterial pressure control, intravenous infusion and blood sampling are the standard use of a side port.

• A special construction of the SECU STAT hemostatic valve has been developed, which is built into the throat of the loader, designed especially to withstand the high pressure of the arterial system (up to 300mm / Hg).
• The valve seals securely on all catheters up to the diameter of the loader.
• The special properties of this valve prevent back bleeding even if the guide wire (up to 0.028) is inserted through the valve - replacing the catheter, inserting the catheter through the guide wire.
• The boot throat is equipped with an aileron for fixing the inserted catheter to the skin.
• The X-Ray X-ray loader and dilator are tapered at the distal end to minimize the risk of tissue and vein damage.
• The X-ray diffuser tip of the dilator is conically tapered in close proximity to the guide wire.
• A new loader material has been developed, smooth and resistant to loop and loop formation, with excellent flexibility for placement in the blood vessels without damage. It allows the loader to bend up to 60 ° while maintaining full throughput. This is particularly useful when replacing a catheter.
• Special surface treatment ensures a soft placement in the vein and low friction resistance for catheters and probes.