Global Medical Directory is part of the Informa Markets Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Connect with this vendor - Learn about this product


Group Number: 3622

To meet safety requirements, the gas supply to operating rooms etc must be fitted with a device to allow instant shut off. To allow maintenance the gas supply must be controlled by section. To achieve the demands of safety and maintenance, shut-off valves should be fitted in every main line, riser and branch line in the pipework system.
The valves are degreased and blown clean. They can be equipped with unions to be soldered to the copper piping.
Before delivery each valve is individually leak tested. The ball is sealed with washer of PTFE. The stem is sealed with two silicon O-rings or PTFE washer. The valve housings are sealed with an EPDM quality O-ring.
No maintenance - the ball valve does not need services, when necessary the whole valve is exchanged.